See the Difference
❌ Before Drying
✅ After Drying
🌾 Paddy / RiceVS
🌾 Paddy / Rice
🌽 MaizeVS
🌽 Maize
🫘 SoybeanVS
🫘 Soybean≤ 0.5% broken grain — gentle indirect drying preserves quality, weight & market value
🔄 CROSS FLOW NON AUGER
2 Models15T – 21T
Cross Flow Grain Dryer
Non Auger — 15T & 21T
Non Auger — 15T & 21T
Batch type circulation dryer without auger — simplified structure for easier maintenance and cleaning. Indirect heating via husk or biomass burner. Online moisture monitor and full automatic PLC control standard on both models.
Batch Circulation Without Auger — Simpler, Easier to Maintain
- No auger design reduces mechanical complexity — fewer moving parts, easier cleaning between batches
- Batch type circulating structure — grain continuously circulated through drying and tempering zones
- Simple structure with small volume after dismantling — easy for transportation between sites
- Increased drying area — drying speed accelerated while maintaining grain quality
High-Quality Stainless Steel Drying Layer Mesh
- Drying layer mesh plate made of high-quality stainless steel — strong corrosion resistance and longer service life
- Mesh aperture 2.5–3.0 mm — ensures even passage of grains and more uniform heating throughout the batch
- Better temperature transfer effect — hot air passes uniformly across the full grain bed
- Applicable on both 15T and 21T models — consistent quality on all batch sizes
Siemens PLC — Intelligent Automatic Control
- User-friendly Siemens control panel with large letters and clear display — easy to operate
- Hot air temperature and circulation speed computed automatically based on loaded amount, outside temperature and moisture value
- Online moisture monitor — automatic control stops drying precisely at target moisture content
- Highly automated — reduces labour to one operator, improves efficiency
H-Shaped Steel Frame — 5mm Thickness
- H-shaped structural steel used throughout — more sturdy and reliable with a longer service life
- Steel thickness reaches 5mm — provides peace of mind during heavy-duty continuous use
- Engineered for permanent installation in rice mills and agri-processing plants
- Robust construction handles repeated loading, unloading and thermal cycling without fatigue
High-Quality Motors — Lower Long-Term Cost
- High-quality motors with longer lifespan — saves customers on later maintenance and replacement costs
- Model 15: 6.4 kW | Model 21: 10.9 kW total motor power
- Variety of heat sources — biomass, husk, wood, gas, coal or diesel
- Full safety devices — grain temperature sensor, fault alarm, full load buzzer, thermal relay, overload and leakage protection standard
Advanced Low Temperature Indirect Heating Technology
- Advanced batch type low temperature circulation drying — improves drying speed and quality efficiently
- Indirect heating — non-pollution, removes dust from grain, combustion gases never contact grain
- Crack rate less than 3% and grind rate less than 0.5% — both superior to national standard JB/T10268
- Wide application range — paddy, wheat, corn, rapeseed and other seeds all supported
Key Technical Features
Indirect Heating
Hot air never contacts combustion gases — grain quality and food safety fully protected.
PLC Microcomputer Control
Fully automated drying cycle — hot air temperature and fan volume auto-adjusted throughout.
Online Moisture Meter
Real-time moisture monitoring — stops drying at target content, no over-drying, no weight loss.
≤0.5% Broken Rate
Gentle drying at controlled low temperature — grain quality and germination rate preserved.
Husk / Biomass Compatible
Run on rice husk, wood chips, straw or corn cob — near-zero fuel cost from farm waste.
Corner Box Structure
First domestic corner box design — high strength without deformation, stable flow rate, high drying rate.
Siemens Electrical
Globally certified Siemens components — high stability, global spares supply chain, easy India maintenance.
Full Safety Devices
Full grain alarm, thermal relay, temperature controller, grain temp sensor, overload and leakage protection standard.
Modular & Portable
Small volume after dismantling — easy to transport between sites and reinstall as needed.
98% Discharge Rate
Connecting-rod lower winch structure — 98% grain discharge with minimal residue each cycle.
Mixed / Cross Flow
Superior grain contact with hot air — uniform drying across every batch at every capacity level.
Multi-Crop Versatile
One dryer handles paddy, wheat, maize, rapeseed and other seeds — maximise ROI on single investment.
Technical Specifications
Swipe left to see all columns
| Parameter | Model 15 (15T) | Model 21 (21T) |
|---|---|---|
| Structure | Batch Type Circulation | |
| Drying Way | Indirect Heating — Cross Flow | |
| Cyclic Batch | 15 Ton | 21 Ton |
| Paddy Capacity (kg) | 2,300 – 15,000 | 5,000 – 21,000 |
| Wheat Capacity (kg) | 2,700 – 15,000 | 6,000 – 21,000 |
| Total Weight (KG) | 3,800 | 4,300 |
| Dimension L×W×H (mm) | 2100×2080×10327 | 2700×2080×9141 |
| Dimension L×W×H (mm) | 3157×481×12155 | 4180×3727×12735 |
| Motor Power (KW) | 6.4 | 10.9 |
| Fan Model | 4-72-6A | 4.72-7.1A |
| Rated Air Flow (m³/h) | 6,677 – 13,353 | 16,576 – 8,288 |
| Drying Rate (%/h) | 0.5 – 1.2 | |
| Drying Capacity (t%/h) | > 10.5 | > 15 |
| Hot Air Temp Range (°C) | 40 – 90 | |
| Fuel Consumption (kg/h) | 30–40 (rice hull) | 40–60 (rice hull) |
| Voltage / Frequency | Three Phase 415V · Single Phase 220V / 50Hz | |
| Loading & Unloading Time | ||
| Loading — Paddy (min) | 45 – 55 | 55 – 70 |
| Loading — Wheat (min) | 45 – 60 | 50 – 65 |
| Unloading — Paddy (min) | 55 – 60 | 55 – 70 |
| Unloading — Wheat (min) | 55 – 60 | 50 – 65 |
| Safety & Standard Equipment | ||
| Safety Device | Grain temperature sensor · Fault alarm · Full load buzzer · Over-temperature alarm · Thermal relay · Hot air temperature sensor · Overload protection · Leakage protection | |
| Standard Device | Online moisture monitor · Conveying system · Unloading system · Drying system · Tempering system · Elevator · Exhaust fan (low noise) · Automatic control system | |
